dmesg - Intel Core i5 650
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Freeing 95-100 pfn range: 107 pages freed
1-1 mapping on 95->100
Freeing df6cf-ebb48 pfn range: 50297 pages freed
1-1 mapping on df6cf->100000
Released 50404 pages of unused memory
Set 133532 page(s) to 1-1 mapping
Populating 100000-10c4e4 pfn range: 50404 pages added
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x0000000000094fff] usable
Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x00000000df6cefff] usable
Xen: [mem 0x00000000df6cfc00-0x00000000df723bff] ACPI NVS
Xen: [mem 0x00000000df723c00-0x00000000df725bff] ACPI data
Xen: [mem 0x00000000df725c00-0x00000000dfffffff] reserved
Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Xen: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
Xen: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Xen: [mem 0x0000000100000000-0x0000000117ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. OptiPlex 980 /0C522T, BIOS A16 05/28/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
e820: last_pfn = 0xdf6cf max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008f000] 8f000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x10c200000-0x10c3fffff]
[mem 0x10c200000-0x10c3fffff] page 4k
BRK [0x01ff7000, 0x01ff7fff] PGTABLE
BRK [0x01ff8000, 0x01ff8fff] PGTABLE
init_memory_mapping: [mem 0x10c000000-0x10c1fffff]
[mem 0x10c000000-0x10c1fffff] page 4k
BRK [0x01ff9000, 0x01ff9fff] PGTABLE
init_memory_mapping: [mem 0x108000000-0x10bffffff]
[mem 0x108000000-0x10bffffff] page 4k
BRK [0x01ffa000, 0x01ffafff] PGTABLE
BRK [0x01ffb000, 0x01ffbfff] PGTABLE
BRK [0x01ffc000, 0x01ffcfff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x107ffffff]
[mem 0x100000000-0x107ffffff] page 4k
init_memory_mapping: [mem 0x00100000-0xdf6cefff]
[mem 0x00100000-0xdf6cefff] page 4k
init_memory_mapping: [mem 0x10c400000-0x117ffffff]
[mem 0x10c400000-0x117ffffff] page 4k
RAMDISK: [mem 0x02403000-0x03fa3fff]
ACPI: RSDP 00000000000fec00 000024 (v02 DELL )
ACPI: XSDT 00000000000fc7e0 00007C (v01 DELL B11K 00000015 ASL 00000061)
ACPI: FACP 00000000000fc8d0 0000F4 (v03 DELL B11K 00000015 ASL 00000061)
ACPI: DSDT 00000000ffdcbee5 0047BC (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000df6cfc00 000040
ACPI: SSDT 00000000ffdd07c2 0000AC (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fc9c4 000092 (v01 DELL B11K 00000015 ASL 00000061)
ACPI: BOOT 00000000000fca56 000028 (v01 DELL B11K 00000015 ASL 00000061)
ACPI: ASF! 00000000000fca7e 000096 (v32 DELL B11K 00000015 ASL 00000061)
ACPI: MCFG 00000000000fcb14 00003C (v01 DELL B11K 00000015 ASL 00000061)
ACPI: HPET 00000000000fcb50 000038 (v01 DELL B11K 00000015 ASL 00000061)
ACPI: TCPA 00000000000fcdac 000032 (v01 DELL B11K 00000015 ASL 00000061)
ACPI: DMAR 00000000000fcdde 000080 (v01 DELL B11K 00000015 ASL 00000061)
ACPI: SLIC 00000000000fcb88 000176 (v01 DELL B11K 00000015 ASL 00000061)
ACPI: SSDT 00000000df725c00 0015D8 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x0000000117ffffff]
Initmem setup node 0 [mem 0x00000000-0x117ffffff]
NODE_DATA [mem 0x10c4df000-0x10c4e3fff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x117ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00094fff]
node 0: [mem 0x00100000-0xdf6cefff]
node 0: [mem 0x100000000-0x117ffffff]
On node 0 totalpages: 1013347
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3988 pages, LIFO batch:0
DMA32 zone: 14236 pages used for memmap
DMA32 zone: 911055 pages, LIFO batch:31
Normal zone: 1536 pages used for memmap
Normal zone: 98304 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00095000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdf6cf000-0xdf6cffff]
PM: Registered nosave memory: [mem 0xdf6d0000-0xdf722fff]
PM: Registered nosave memory: [mem 0xdf723000-0xdf723fff]
PM: Registered nosave memory: [mem 0xdf724000-0xdf724fff]
PM: Registered nosave memory: [mem 0xdf725000-0xdf725fff]
PM: Registered nosave memory: [mem 0xdf726000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.4.1 (preserve-AD)
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880107400000 s86400 r8192 d24192 u262144
pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
xen: PV spinlocks enabled
Built 1 zonelists in Node order, mobility grouping on. Total pages: 997490
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
software IO TLB [mem 0x103400000-0x107400000] (64MB) mapped at [ffff880103400000-ffff8801073fffff]
Memory: 3670704K/4053388K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 382684K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
xen: sci override: global_irq=9 trigger=0 polarity=0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> pirq=9 -> irq=9 (gsi=9)
xen: acpi sci 9
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16252928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
tsc: Detected 3192.110 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.22 BogoMIPS (lpj=12768440)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
cpu 0 spinlock event irq 41
Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
installing Xen timer for CPU 1
cpu 1 spinlock event irq 48
installing Xen timer for CPU 2
cpu 2 spinlock event irq 55
installing Xen timer for CPU 3
cpu 3 spinlock event irq 62
x86: Booted up 1 node, 4 CPUs
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdf6cfc00-0xdf723bff] (344064 bytes)
pinctrl core: initialized pinctrl subsystem
xen:grant_table: Grant tables using version 2 layout
Grant table initialized
regulator-dummy: no parameters
RTC time: 18:04:09, date: 04/14/15
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0x7E (20131115/tbprint-214)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xdf800000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xff87c000-0xff87ffff]
pci_bus 0000:00: root bus resource [mem 0xff870000-0xff8707ff]
pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff]
pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
pci 0000:00:16.2: reg 0x10: [io 0xfe80-0xfe87]
pci 0000:00:16.2: reg 0x14: [io 0xfe90-0xfe93]
pci 0000:00:16.2: reg 0x18: [io 0xfea0-0xfea7]
pci 0000:00:16.2: reg 0x1c: [io 0xfeb0-0xfeb3]
pci 0000:00:16.2: reg 0x20: [io 0xfef0-0xfeff]
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xec98-0xec9f]
pci 0000:00:16.3: reg 0x14: [mem 0xf7fdb000-0xf7fdbfff]
pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7fe0000-0xf7ffffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7fdc000-0xf7fdcfff]
pci 0000:00:19.0: reg 0x18: [io 0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7fdd000-0xf7fdd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xff87c000-0xff87ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7fde000-0xf7fde3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
pci 0000:00:1f.2: reg 0x24: [mem 0xff870000-0xff8707ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7fdf000-0xf7fdf0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff]
pci 0000:01:00.0: [1002:9498] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf7df0000-0xf7dfffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xdc00-0xdcff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7dec000-0xf7deffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xf7ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff87c000-0xff87ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff870000-0xff8707ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x00095000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf6cf000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource xen
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0800-0x085f] could not be reserved
system 00:00: [io 0x0c00-0x0c7f] has been reserved
system 00:00: [io 0x0860-0x08ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
xen: registering gsi 13 triggering 1 polarity 0
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
xen: registering gsi 8 triggering 1 polarity 0
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: registering gsi 7 triggering 1 polarity 0
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
xen: registering gsi 4 triggering 1 polarity 0
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
PM-Timer failed consistency check (0xffffff) - aborting.
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0400000-0xf05fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xdf800000-0xf7ffffff]
pci_bus 0000:00: resource 10 [mem 0xff87c000-0xff87ffff]
pci_bus 0000:00: resource 11 [mem 0xff870000-0xff8707ff]
pci_bus 0000:00: resource 12 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: resource 13 [mem 0xfeda6000-0xfeda6fff]
pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf05fffff]
pci_bus 0000:03: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:04: resource 9 [mem 0xdf800000-0xf7ffffff]
pci_bus 0000:04: resource 10 [mem 0xff87c000-0xff87ffff]
pci_bus 0000:04: resource 11 [mem 0xff870000-0xff8707ff]
pci_bus 0000:04: resource 12 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:04: resource 13 [mem 0xfeda6000-0xfeda6fff]
pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
xen: registering gsi 23 triggering 0 polarity 1
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28292K (ffff880002403000 - ffff880003fa4000)
Simple Boot Flag at 0x7a set to 0x1
microcode: CPU0 sig=0x20652, pf=0x2, revision=0xd
microcode: CPU1 sig=0x20652, pf=0x2, revision=0xd
microcode: CPU2 sig=0x20652, pf=0x2, revision=0xd
microcode: CPU3 sig=0x20652, pf=0x2, revision=0xd
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1429034650.189:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7224
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_idle: intel_idle yielding to none
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Warning: Processor Platform Limit not supported.
GHES: HEST is not enabled!
xen_acpi_processor: Uploading Xen processor PM info
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
xen: registering gsi 17 triggering 0 polarity 1
xen: --> pirq=17 -> irq=17 (gsi=17)
0000:00:16.3: ttyS4 at I/O 0xec98 (irq = 17, base_baud = 115200) is a 16550A
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
xen: registering gsi 18 triggering 0 polarity 1
xen: --> pirq=18 -> irq=18 (gsi=18)
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
ata2: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xen_netfront: Initialising Xen virtual ethernet driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7fdd000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7fde000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 11:461:89
tty hvc4: hash matches
rtc_cmos 00:04: setting system clock to 2015-04-14 18:04:09 UTC (1429034649)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[123]: starting version 204
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x17 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pmp fbs pio ems sxs apst
ahci 0000:00:1f.2: port 0 is not capable of FBS
ahci 0000:00:1f.2: port 1 is not capable of FBS
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ahci 0000:00:1f.2: port 2 is not capable of FBS
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870100 irq 73
ata4: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870180 irq 73
ata5: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870200 irq 73
ata6: DUMMY
ata7: SATA max UDMA/133 abar m2048@0xff870000 port 0xff870300 irq 73
ata8: DUMMY
xen: registering gsi 21 triggering 0 polarity 1
xen: --> pirq=21 -> irq=21 (gsi=21)
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] radeon kernel modesetting enabled.
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
[drm] initializing kernel modesetting (RV730 0x1002:0x9498 0x174B:0xE109).
[drm] register mmio base: 0xF7DF0000
[drm] register mmio size: 65536
ATOM BIOS:
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
Failed to add WC MTRR for [00000000e0000000-00000000efffffff]; performance may suffer.
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1850930 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV730 Microcode
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880002dfdc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880002dfdc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9000489c598
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
usb 2-1: new high-speed USB device number 2 using ehci-pci
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 84:2b:2b:9b:5f:cd
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: A002FF-0FF
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ata5: SATA link down (SStatus 4 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST3500418AS, CC46, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-STDVD+/-RW GT32N, A102, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT32N A102 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 2-1.3: new low-speed USB device number 3 using ehci-pci
sda: sda1 sda2 < sda5 > sda3
sd 2:0:0:0: [sda] Attached SCSI disk
[drm] fb mappable at 0xE045E000
[drm] vram apper at 0xE0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
usb 2-1.3: New USB device found, idVendor=046d, idProduct=c05a
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: USB Optical Mouse
usb 2-1.3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
usb 2-1.5: new low-speed USB device number 4 using ehci-pci
Console: switching to colour frame buffer device 160x64
random: lvm urandom read with 92 bits of entropy available
usb 2-1.5: New USB device found, idVendor=413c, idProduct=2106
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: Dell QuietKey Keyboard
usb 2-1.5: Manufacturer: Dell
input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.5/input0
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4051964k swap on /dev/sda5. Priority:-1 extents:1 across:4051964k FS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[484]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
lp0: using parport0 (interrupt-driven).
parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
device-mapper: multipath: version 1.6.0 loaded
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
init: avahi-cups-reload main process (681) terminated with status 1
type=1400 audit(1429034657.700:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=691 comm="apparmor_parser"
type=1400 audit(1429034657.700:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
type=1400 audit(1429034657.700:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
type=1400 audit(1429034657.700:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=677 comm="apparmor_parser"
type=1400 audit(1429034657.700:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=677 comm="apparmor_parser"
type=1400 audit(1429034657.700:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=677 comm="apparmor_parser"
type=1400 audit(1429034657.704:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=677 comm="apparmor_parser"
type=1400 audit(1429034657.704:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=677 comm="apparmor_parser"
type=1400 audit(1429034657.704:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
type=1400 audit(1429034657.704:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
input: Dell WMI hotkeys as /devices/virtual/input/input7
gpio_ich: GPIO from 180 to 255 on gpio_ich
hda_codec: ALC269VB: SKU not ready 0x411111f0
autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Rear Mic=0x19
Front Mic=0x18
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: failsafe main process (737) killed by TERM signal
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: samba-ad-dc main process (970) terminated with status 1
gre: GRE over IPv4 demultiplexor driver
openvswitch: Open vSwitch switching datapath
device ovs-system entered promiscuous mode
device ovsbr0 entered promiscuous mode
device eth0 entered promiscuous mode
audit_printk_skb: 144 callbacks suppressed
type=1400 audit(1429034668.200:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=1830 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
Bridge firewalling registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
type=1400 audit(1429034669.940:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=2032 comm="apparmor_parser"
type=1400 audit(1429034669.948:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=2037 comm="apparmor_parser"
type=1400 audit(1429034669.948:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=2037 comm="apparmor_parser"
type=1400 audit(1429034669.948:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=2037 comm="apparmor_parser"
type=1400 audit(1429034669.948:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=2037 comm="apparmor_parser"
type=1400 audit(1429034669.948:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=2037 comm="apparmor_parser"
type=1400 audit(1429034669.948:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=2037 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
ip6_tables: (C) 2000-2006 Netfilter Core Team
xen:xen_evtchn: Event-channel device installed
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
init: plymouth-stop pre-start process (3085) terminated with status 1
device eth0 left promiscuous mode
device ovsbr0 left promiscuous mode
device vethKXXDER entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethKXXDER: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vethKXXDER: link becomes ready
lxcbr0: port 1(vethKXXDER) entered forwarding state
lxcbr0: port 1(vethKXXDER) entered forwarding state
lxcbr0: port 1(vethKXXDER) entered forwarding state
device vethGY60ML entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethGY60ML: link is not ready
lxcbr0: port 2(vethGY60ML) entered forwarding state
lxcbr0: port 2(vethGY60ML) entered forwarding state
lxcbr0: port 2(vethGY60ML) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): vethGY60ML: link becomes ready
lxcbr0: port 2(vethGY60ML) entered forwarding state
lxcbr0: port 2(vethGY60ML) entered forwarding state
lxcbr0: port 2(vethGY60ML) entered forwarding state
type=1400 audit(1429097734.804:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=14780 comm="apparmor_parser"
type=1400 audit(1429097734.804:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=14780 comm="apparmor_parser"
type=1400 audit(1429097734.804:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=14780 comm="apparmor_parser"
lxcbr0: port 2(vethGY60ML) entered disabled state
device vethGY60ML left promiscuous mode
lxcbr0: port 2(vethGY60ML) entered disabled state